Creality CR-Touch Auto Leveling Kit for Ender 3D Printers

  • Alennusmyynti
  • €39,00
  • Normaalihinta €59,00



DESCRIPTION:

CR Touch

METAL PROBE: Upgraded CR Touch reduces wear and tear and greatly prolongs its service life.

COST-EFFECTIVE: Higher precision and low power consumption, multi-point detection, and smart compensation.

EASY TO INSTALL: Download the CR Touch program from the Website 'Support-Download' and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer.

APPLICABILITY: 3D Printer Auto Bed Leveling Sensor Kit for Ender 3 / Ender 3 V2 / Ender 3 Pro/Ender 3 Max/Ender 5 / CR-10 Printers with 32 Bit V4.2.2 / V4.2.7 Mainboard

CR Touch Auto Leveling Kit Installation Guide


About Creality Shop

Creality R&D investments in 3d printing cover FDM/Resin 3D printers, 3D Scanners, Filaments, Resin, as well as 3D Printed drones and robots that back up STEAM education.

Creality.shop is the official online shop Creality3D Official's online retailer in EUROPE, Mainly selling RESIN 3D Printers, Resin for 3D Printers, FDM 3D printers, PLA Filament, and 3D Printing Accessories/Parts.

We provide excellent customer service and after-sales service. Any pre-sales or after-sales questions can email us: service@creality.shop, we will provide you with professional answers, and professional technical support services

We hope our products will enable you to turn your ideas into reality no matter you are an engineer, a hobbyist or a student.

Our Sale History

Our products are all certified to CE, FCC, and ROHS standards, have exported to more than 192 countries including, but not limited to France, the United States of America, Australia, Russia, the United Kingdom, Germany, Singapore, Egypt, and India, bringing technological innovation to all walks of life.

In terms of retail sales value in 2021. The sales of similar products rank among the top three in the 3d Printer industry. Every time before we ship overseas, we will conduct strict quality inspections to minimize the defect rate.

We are not only committed to providing customers with the best 3D printer but also committed to providing you with the best 3D printer service.

Hope our 3d Printers and service can bring your life satisfaction and convenience.

Frankfurt Warehouse, Germany

Polish warehouse

Liege Warehouse, Belgium

Czech Warehouse

Paris Warehouse, France

Customer Reviews

Based on 9 reviews
89%
(8)
0%
(0)
0%
(0)
0%
(0)
11%
(1)
H
Hugo Formiga
received a different product

I received a different product and so far I have not received a reply to my email

D
Dario Arzdorf
Cr10 V1 not supported but really good pice of tech

Sadly the first version of the Cr10 did not support a auto leveling sensor so I had to upgrade my Mainboard. It took some time to figure everything out but in the end it works great and makes printing a lot more enjoyable :)

J
Jonny Melin
Creality CR Touch Auto Leveling Kit

Funkar som det ska toppenbra

R
Rudie
More accurate than BL-touch

I used the CR-touch to replace my BL-Touch on my dual Z-axis Ender 3V2 with the latest Marlin 2.1.1 software. The cable and firmware setup worked for the CR-Touch as well (although afterwards I changed the position offset of the CR-touch to the nozzle as it is 4mm closer to the front of the printer than the BL-touch was). Also had to change the bracket for CR-touch because it has the connector on top and the provided bracket has a cutout in it for the connector. I created a macro that ran the G30 command 100 times and compared the BL-touch results to the CR-touch results and found that the CR-touch results were consistent while the BL-touch had slight variations in results. So I am very happy with this upgrade.

M
Martin Plíšek

Creality CR Touch Auto Leveling Kit for Ender Series

Customer Reviews

Based on 9 reviews
89%
(8)
0%
(0)
0%
(0)
0%
(0)
11%
(1)
H
Hugo Formiga
received a different product

I received a different product and so far I have not received a reply to my email

D
Dario Arzdorf
Cr10 V1 not supported but really good pice of tech

Sadly the first version of the Cr10 did not support a auto leveling sensor so I had to upgrade my Mainboard. It took some time to figure everything out but in the end it works great and makes printing a lot more enjoyable :)

J
Jonny Melin
Creality CR Touch Auto Leveling Kit

Funkar som det ska toppenbra

R
Rudie
More accurate than BL-touch

I used the CR-touch to replace my BL-Touch on my dual Z-axis Ender 3V2 with the latest Marlin 2.1.1 software. The cable and firmware setup worked for the CR-Touch as well (although afterwards I changed the position offset of the CR-touch to the nozzle as it is 4mm closer to the front of the printer than the BL-touch was). Also had to change the bracket for CR-touch because it has the connector on top and the provided bracket has a cutout in it for the connector. I created a macro that ran the G30 command 100 times and compared the BL-touch results to the CR-touch results and found that the CR-touch results were consistent while the BL-touch had slight variations in results. So I am very happy with this upgrade.

M
Martin Plíšek

Creality CR Touch Auto Leveling Kit for Ender Series